1、 減少資源浪費：可以循環利用舊有瀝青面層混合料和半剛性基層材料；

　　1. Reduce resource waste: old asphalt surface mixture and semi-rigid base material can be recycled;

　　2、 有效的反射裂縫：泡沫瀝青混合料增加粒料的剪切強度，降低水敏感性，而且具有柔性性質和良好的抗疲勞特性；

　　2. Effectively eliminate reflective cracks: foam asphalt mixture increases the shear strength of granular materials, reduces water sensitivity, and has flexible properties and good fatigue resistance characteristics;

　　3、 具有很好的耐久性：具有良好級配的泡沫瀝青混合料，其強度和耐疲勞等路用性質與粗粒式瀝青混凝土相當；

　　3. Good durability: foam asphalt mixture with good gradation has the same road use properties as coarse grained asphalt concrete in terms of strength and fatigue resistance;

　　4、 有更好的高溫穩定性：泡沫瀝青冷再生混合料特殊的結構形式（瀝青的不連續分散），決定了材料的溫度敏感性低；

　　4. Better high-temperature stability: the special structure of foam asphalt cold recycling mixture (discontinuous dispersion of asphalt) determines the low temperature sensitivity of the material;

　　5、 提高了結構的完整性：冷再生成型厚度與瀝青路面相比明顯要厚，均勻的結構層經過重型壓實機械充分壓實后形成連續結構界面；

　　5. Improved structural integrity: The thickness of cold recycling molding is significantly thicker compared to asphalt pavement, and the uniform structural layer is fully compacted by heavy-duty compaction machinery to form a continuous structural interface;

　　6、 大大減少對交通的影響：泡沫瀝青混合料拌好后可以立即壓實，壓實結束即可開放輕交通，施工工期可以大大縮短；

　　6. Greatly reduce the impact on traffic: foam asphalt mixture can be compacted immediately after mixing, and light traffic can be opened after compaction, and the construction period can be greatly shortened;

　　7、 節約成本和能耗：與傳統銑刨罩面維修方法相比，可節約 25 % 左右的成本，節省加熱能源 60 % 以上，減少二氧化碳排放量 80 % 以上；

　　7. Cost and energy savings: Compared with traditional milling and planing methods, it can save about 25% of costs, save over 60% of heating energy, and reduce carbon dioxide emissions by over 80%;

　　8、 再生混合料能很好地平衡剛柔度，克服現有半剛性基層的缺陷，延緩路面的破損時間，逐步實現路面結構多樣性；

　　8. Recycled mixtures can effectively balance rigidity and flexibility, overcome the defects of existing semi-rigid base layers, delay the damage time of road surfaces, and gradually achieve diversity in road surface structures;

　　9、 該技術節約大量資源和資金，還能有利于和諧交通建設，促進交通事業的可持續發展，具有非常高的應用價值。

　　9. This technology saves a lot of resources and funds, and is also beneficial for the construction of harmonious transportation, promoting the sustainable development of the transportation industry, and has very high application value.

　　維特根 3800 CR 設備將冷再生與冷銑刨功能集為一體，具有無可匹敵的通用性。設備獨有的維特根下切工藝，多種工作寬度，的銑刨及拌合性能等優勢使該設備以質量進行冷再生施工，無論遇到何種挑戰，均能為您提供理想的解決方案。

　　The Wittgen 3800 CR equipment integrates cold regeneration and cold milling functions, providing unparalleled versatility. The unique Wittgenstein cutting process, multiple working widths, efficient milling and mixing performance, and other advantages of the equipment enable it to perform cold recycling construction with the highest quality. No matter what challenges you encounter, it can provide you with an ideal solution.

　　本文由 冷再生機租賃 友情奉獻.更多有關的知識請點擊  https://www.sddhfjx.com   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Cold Recycling Machine Rental For more related knowledge, please click https://www.sddhfjx.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.